View F177233320_6997579.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document number: 28161 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 13-jan-12 343 interference suppression film capacitors mkt radial potted type f1772-2 310 v-x2 vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in mm applications high stability grade for continuous across the line x2 applications. see also ?application note?: www.vishay.com/doc?28153 reference standards iec 60384-14 ed-3 and en 60384-14 ?iec 60065 pass. flamm. class c? ul 1283 ul 1414 csa-e384-14 marking c-value; tolerance; rated volt age; sub-class; manufacturer?s type; code for dielectric material; manufacturer location; manufacturer?s logo; year and week; safety approvals dielectric polyester film electrodes metallized construction series construction rated voltage ac 310 v; 50 hz to 60 hz features ? 15 mm to 37.5 mm lead pitch ? aec-q200 qualified for c ? 470 nf ? supplied loose in box, taped on reel ? compliant to rohs directive 2002/95/ec permissible dc voltage dc 800 v dc at 85 c dc 630 v dc at 110 c encapsulation plastic case, epoxy resin sealed, flame retardant ul-class 94 v-0 climatic testing class acc. to iec 60068-1 40/110/56/c capacitance range (e12 series) e12 series 0.01 f to 2.2 f preferred values acc. to e6 capacitance tolerance 10 %, 20 % ( 5 % on request) leads tinned wire maximum application temperature 110 c detail specification for more detailed data and test requirements contact: rfi@vishay.com pitch p 0.4 h l t l ? d t w
f1772-2 310 v-x2 vishay bccomponents interference suppression film capacitors mkt radial potted type www.vishay.com for technical questions, contact: rfi@vishay.com document number: 28161 344 revision: 13-jan-12 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number notes ? for detailed tape specifications re fer to ?packaging information? www.vishay.com/doc?28139 (1) taped on reel pitch ? 27.5 mm is not available specific reference data note (1) see ?voltage proof test for metalized film capacitors?: www.vishay.com/doc?28139 description value rated ac voltage (u rac ) 310 v permissible dc voltage (u rdc ) 630 v tangent of loss angle ? 100 x 10 -4 at 1 khz rated voltage pulse slope at (du/dt) r 435 v dc 100 v/s r between leads, for c ? 0.33 f at 100 v; 1 min > 15 000 m ? rc between leads, c > 0.33 f at 100 v; 1 min > 5000 s r between leads and case; 100 v; 1 min > 30 000 m ? withstanding (dc) voltage (cut off current 10 ma) (1) ; rise time ? 1000 v/s c ? 0.47 f 2200 v; for 1 min c ? 0.47 f 2150 v; for 1 min withstanding (ac) voltage between leads and case 2120 v; 1 min maximum application temperature 110 c f 1772 x xx x x x x capacitance (numerically) example: 468 = 680 nf multiplier (nf) 0.1 2 13 10 4 100 5 type packaging (taped on reel) (1) code code details tolerance 2290 h: 16.5 mm 20 % 2291 h: 18.5 mm 20 % 2960 h: 16.5 mm 20 % 2261 h: 18.5 mm 20 % 2900 h: 16.5 mm 10 % 2901 h: 18.5 mm 10 % 2970 h: 16.5 mm 10 % 2971 h: 18.5 mm 10 % packaging (loose) code code details tolerance 2004/2164 lead length 4 - 1 mm 10 % 2000/2160 lead length 6 - 1 mm 10 % 2015/2165 lead length 15 - 1 mm 10 % 2030/2163 lead length 30 + 5 mm 10 % 2204/2264 lead length 4 - 1 mm 20 % 2200/2260 lead length 6 - 1 mm 20 % 2215/2265 lead length 15 - 1 mm 20 % 2230/2263 lead length 30 + 5 mm 20 %
document number: 28161 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 13-jan-12 345 f1772-2 310 v-x2 interference suppressi on film capacitors mkt radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 c-tol. = 10 % notes (1) these capacitors can be deliv ered on continuous tape and reel. the ordering code is: f1772-...-2900 at h = 16.5 mm f1772-...-2901 at h = 18.5 mm f1772-...-2970 at h = 16.5 mm f1772-...-2971 at h = 18.5 mm (2) further information about packaging quantities with different l ead length and/or taped versions, see document ?packaging quanti ties? www.vishay.com/doc?27608 (3) weight for short lead product only ? spq = standard packing quantity ? for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 capacitance (f) pitch (mm) dimensions w x h x l max. (mm) mass (3) (g) spq (pieces) short lead ordering code (1)(2) d t = 0.60 mm 0.06 mm 0.010 15 5.0 x 11.0 x 17.5 1.4 750 f177231020.. 0.012 15 5.0 x 11.0 x 17.5 1.4 750 f177231220.. 0.015 15 5.0 x 11.0 x 17.5 1.4 750 f177231520.. 0.018 15 5.0 x 11.0 x 17.5 1.4 750 f177231820.. 0.022 15 5.0 x 11.0 x 17.5 1.4 750 f177232220.. 0.027 15 5.0 x 11.0 x 17.5 1.4 750 f177232720.. 0.033 15 5.0 x 11.0 x 17.5 1.4 750 F177233320.. 0.039 15 6.0 x 12.0 x 17.5 2.0 500 f177233920.. 0.047 15 6.0 x 12.0 x 17.5 2.0 500 f177234720.. 0.056 15 6.0 x 12.0 x 17.5 2.0 500 f177235620.. d t = 0.80 mm 0.08 mm 0.068 15 7.0 x 13.5 x 17.5 2.4 450 f177236820.. 0.082 15 8.5 x 15.0 x 17.5 2.7 300 f177238220.. 0.10 15 8.5 x 15.0 x 17.5 2.7 325 f177241020.. 0.12 15 8.5 x 15.0 x 17.5 2.7 300 f177241220.. 0.15 15 8.5 x 15.0 x 17.5 2.7 300 f1772415216. 0.15 22.5 7.0 x 16.5 x 26.0 4.1 235 f177241520.. 0.18 22.5 7.0 x 16.5 x 26.0 4.1 235 f177241820.. 0.22 15 10.0 x 16.5 x 17.5 3.0 235 f1772422216. 0.22 22.5 8.5 x 18.0 x 26.0 4.6 200 f177242220.. 0.27 22.5 10.0 x 19.5 x 26.0 6.7 170 f177242720.. 0.33 15 13.5 x 22.5 x 18.0 5.5 185 f1772433216. 0.33 22.5 10.0 x 19.5 x 26.0 6.7 170 f177243320.. 0.39 27.5 11.0 x 21.0 x 31.0 9.1 125 f177243920.. 0.47 22.5 12.0 x 22.0 x 26.0 13.0 110 f17724472160 0.47 27.5 11.0 x 21.0 x 31.0 9.1 125 f177244720.. 0.56 27.5 11.0 x 21.0 x 31.0 9.1 125 f177245620.. 0.68 22.5 15.5 x 26.5 x 26.5 13.5 110 f1772468216. 0.68 27.5 13.0 x 23.0 x 31.0 12.9 110 f177246820.. 0.82 27.5 13.0 x 23.0 x 31.0 12.9 110 f177248220.. 1.0 22.5 15.5 x 26.5 x 26.5 13.5 110 f1772510216. 1.0 27.5 15.0 x 25.0 x 31.5 15.0 100 f177251020.. 1.2 37.5 14.5 x 24.5 x 41.5 18.9 80 f177251220.. 1.5 27.5 18.0 x 28.0 x 31.0 19.0 85 f1772515216. 1.5 37.5 15.5 x 28.5 x 41.5 24.0 70 f177251520.. 1.8 37.5 15.5 x 28.5 x 41.5 24.0 70 f177251820.. 2.2 27.5 21.0 x 31.0 x 31.0 28.0 70 f1772522216. 2.2 37.5 18.0 x 32.5 x 41.5 31.6 60 f177252220..
f1772-2 310 v-x2 vishay bccomponents interference suppression film capacitors mkt radial potted type www.vishay.com for technical questions, contact: rfi@vishay.com document number: 28161 346 revision: 13-jan-12 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 c-tol. = 20 % notes (1) these capacitors can be deliv ered on continuous tape and reel the ordering code is: f 1772-...-2290 at h = 16.5 mm f 1772-...-2291 at h = 18.5 mm f 1772-...-2960 at h = 16.5 mm f 1772-...-2961 at h = 18.5 mm (2) further information about packing quantities with different lead length and/or taped versions, see document ?packing quantities ? www.vishay.com/docs?27608 ? spq = standard packing quantity ? for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 approvals capacitance (f) pitch (mm) dimensions w x h x l max. (mm) mass (g) spq (pieces) short lead ordering code (1)(2) d t = 0.60 mm 0.06 mm 0.01 15 5.0 x 11.0 x 17.5 1.4 750 f177231022.. 0.015 15 5.0 x 11.0 x 17.5 1.4 750 f177231522.. 0.022 15 5.0 x 11.0 x 17.5 1.4 750 f177232222.. 0.033 15 5.0 x 11.0 x 17.5 1.4 750 f177233322.. 0.047 15 5.0 x 11.0 x 17.5 1.4 750 f177234722.. 0.068 15 6.0 x 12.0 x 17.5 2.0 600 f177236822.. 0.10 15 6.0 x 12.0 x 17.5 2.0 600 f177241022.. d t = 0.80 mm 0.08 mm 0.15 15 8.5 x 15.0 x 17.5 2.7 325 f1772415226.. 0.15 22.5 6.0 x 15.5 x 26.0 3.3 260 f177241522... 0.22 15 10.0 x 16.5 x 17.5 4.5 300 f1772422226.. 0.22 22.5 7.0 x 16.5 x 26.0 4.1 235 f177242222... 0.33 15 13.5 x 22.5 x 18.0 5.5 185 f1772433226. 0.33 22.5 8.5 x 18.0 x 26.0 5.3 190 f177243322.. 0.47 22.5 10.0 x 19.5 x 26.0 6.7 170 f1772447226.. 0.47 27.5 9.0 x 19.0 x 31.5 6.8 160 f177244722.. 0.68 22.5 12.0 x 22.0 x 26.0 13.4 110 f1772468226.. 0.68 27.5 11.0 x 21.0 x 31.0 12.9 125 f177246822.. 1.0 22.5 15.5 x 26.5 x 26.5 13.5 110 f1772510226.. 1.0 27.5 15.0 x 25.0 x 31.5 15.0 100 f177251022.. 1.5 27.5 18.0 x 28.0 x 31.5 19.0 85 f1772515226. 1.5 37.5 14.5 x 24.5 x 41.5 18.9 80 f177251522.. 2.2 27.5 21.0 x 31.0 x 31.0 28.0 70 f1772522226. 2.2 37.5 15.5 x 28.5 x 41.5 24.0 70 f177252222.. safety approvals x2 voltage value file numbers en 60384-14 (enec) (= iec 60384-14 ed 3) 310 v ac 0.01 - 2.2 f x2 40005079 ul 1414 250 v ac 0.01 - 1.0 f x2 e 100682 ul 1283 250 v ac 0.01 - 2.2 f x2 e 76297 csa-e 384-14 310 v ac 0.01 - 2.2 f x2 2127723 cb test-certificate 310 v ac 0.01 - 2.2 f x2 de 1-40110/a1 the enec-approval together with the cb-cer tificate replace all national marks of the following countries (they have already sig ned the enec-agreement): austria; belgium; czech. republic; denmark; finland; france; germany; greece; hungary; ireland; italy; luxembo urg; netherlands; norway; portugal; slovenian; spain; sweden; switzerland and united kingdom.
document number: 28161 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 13-jan-12 347 f1772-2 310 v-x2 interference suppressi on film capacitors mkt radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting normal use the capacitors are designed for mounting on printed-circuit boa rds. the capacitors packed in bandoliers are designed for mounting in printed-circuit boards by m eans of automatic insertion machines. for detailed tape specifications refer to ?packaging information?. specific method of mounting to withstand vibration and shock in order to withstand vibration and shock tests, it must be ens ured that stand-off pips are in good contact with the printed-ci rcuit board: ? for pitches ?? 15 mm capacitors shall be mechanically fixed by the leads ? for larger pitches the capacitors shall be mounted in the same way and the body clamped space requirements on printed circuit board the maximum space for length (i max. ), width (w max. ) and height (h max. ) of film capacitors to take in account on the printed circuit board is shown in the drawings. ? for products with pitch ? 15 mm, ? w = ? l = 0.3 mm; ? h = 0.1 mm ? for products with 15 mm < pitch ?? 27.5 mm, ? w = ? l = 0.5 mm; ? h = 0.1 mm ? for products with pitch = 37.5 mm, ? w = ? l = 0.7 mm; ? h = 0.5 mm eccentricity defined as in drawing. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. soldering conditions for general soldering conditions and wave solder ing profile, we refer to the application note: ?soldering guidelines for film capacitors?: www.vishay.com/doc?28171 storage temperature ? storage temperature: t stg = - 25 c to + 40 c with rh maximum 80 % without condensation ratings and characterist ics reference conditions unless otherwise specified, all electrical values apply to an am bient temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. cba116 eccentricity w max. = w + w h max. = h + h i max. = i + i seating plane
f1772-2 310 v-x2 vishay bccomponents interference suppression film capacitors mkt radial potted type www.vishay.com for technical questions, contact: rfi@vishay.com document number: 28161 348 revision: 13-jan-12 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 characteristics capacitance as a function of ambient temperature (typical curve) impedance as a functi on of frequency (typical curve) tangent of loss angle as a function of frequency (typical curv e) resonant frequency as a function of capacitance (typical curve) max. rms voltage as a function of frequency m ax. rms current as a function of frequency - 60 - 20 20 c/c ( % ) 2 - 2 - 4 - 6 0 60 100 t am b (c) 4 6 min. max. 1 khz typical z ( ) 10 1 0.01 0.05 1.0 5.0 10 50 100 10 0 10 -1 10 -2 10 -3 0.1 0.5 2.2 f 0.47 f 1.5 f 0.22 f 1.0 f 0.1 f 0.6 8 f 0.047 f 0.33 f 0.022 f 0.15 f 0.06 8 f 0.033 f 0.015 f 0.01 f f (mhz) dissipation factor (x 10 -4 ) 10 1 10 2 10 3 f (hz) 10 2 10 3 10 4 10 5 3 2 1 c 0.33 f (c u r v e 1) 0.33 f < c 1.2 f (c u r v e 2) 1.2 f < c 2.2 f (c u r v e 3) 10 1 10 2 10 3 10 4 c (nf) f (mhz) 10 -1 10 0 10 1 10 2 x2 t am b 110 c ac v oltage ( v ) 10 3 10 2 10 1 f (hz) 10 1 10 2 10 3 10 4 10 5 f (hz) ac c u rrent (ma) t am b 110 c 2200 nf 10 1 10 2 10 3 10 4 10 5 10 -1 10 0 10 1 10 2 10 3 10 4 1000 nf 470 nf 100 nf 47 nf 10 nf
document number: 28161 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 13-jan-12 349 f1772-2 310 v-x2 interference suppressi on film capacitors mkt radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 application notes and limiting conditions ? for x2 electromagnetic interference suppressi on where a higher stabililty grade is needed for continuous across the line applications (50 hz/60 hz) with a maximum mains voltage of 310 v ac . ? these capacitors are not intended for continuous pulse applic ation. for these situations capacitors of the ac and pulse programs must be used. ? for series impedance applications we refer to application note: www.vishay.com/doc?28153 ? the maximum ambient temperature must not exceed 110 c. ? rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 v dc and divided by the applied voltage. inspection requirements general notes: sub-clause numbers of tests and performance requirements refer to the ?sectional s pecification, publication iec 60384-14 ed 3 and specific reference data?. group c inspection requirements insulation resistance as a function of ambient temperature (typical curve) t am b (c) 10 5 10 4 10 2 10 3 - 60 - 20 20 60 100 rc (s) sub-clause number and test conditions performance requirements sub-group c1a part of sample of sub-group c1 4.1 dimensions (detail) as specified in chapter ?general data? of this specification initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz 4.3 robustness of terminations tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 no visible damage 4.4 resistance to soldering heat no pre-drying method: 1a solder bath: 280 c 5 c duration: 10 s
f1772-2 310 v-x2 vishay bccomponents interference suppression film capacitors mkt radial potted type www.vishay.com for technical questions, contact: rfi@vishay.com document number: 28161 350 revision: 13-jan-12 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c1a part of sample of sub-group c1 4.19 component solvent resistance isopr opylalcohol at room temperature method: 2 immersion time: 5 0.5 min recovery time: min. 1 h, max. 2 h 4.4.2 final measurements visual examination no visible damage legible marking capacitance ?? c/c| ? 5 % of the value measured initially tangent of loss angle increase of tan ? ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured initially insulation resistance as specified in section ?insulation resistance? of this specification sub-group c1b part of sample of sub-group c1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz 4.20 solvent resistance of the marking i sopropylalcohol at room temperature method: 1 rubbing material: cotton wool immersion time: 5 min 0.5 min no visible damage legible marking 4.6 rapid change of temperature ? a = - 40 c ? b = + 110 c 5 cycles duration t = 30 min 4.6.1 inspection visual examination no visible damage 4.7 vibration mounting: see section ?mounting? of this specification procedure b4 frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h 4.7.2 final inspection visual examination no visible damage 4.9 shock mounting: see section ?mounting? for more information pulse shape: half sine acceleration: 490 m/s2 duration of pulse: 11 ms 4.9.2 final measurements visual examination no visible damage capacitance ?? c/c| ? 5 % of the value measured initally tangent of loss angle increase of tan ? ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured initially insulation resistance as specified in section ?specific reference? of this specification sub-clause number and test conditions performance requirements
document number: 28161 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 13-jan-12 351 f1772-2 310 v-x2 interference suppressi on film capacitors mkt radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c1 combined sample of specimens of sub-groups c1a and c1b 4.11 climatic sequence capacitance 4.11.1 initial measurements measured in 4.4.2 and 4.9.2 tangent of loss angle measured initally in c1a and c1b 4.11.2 dry heat temperature: 110 c duration: 16 h 4.11.3 damp heat cyclic test db, first cycle 4.11.4 cold temperature: - 40 c duration: 2 h 4.11.5 damp heat cyclic test db, remaining cycles 4.11.6 final measurements visual examination no visible damage legible marking capacitance ?? c/c| ? 5 % of the value measured in 4.11.1 tangent of loss angle increase of tan ? ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.11.1 voltage proof 1350 v dc 1 min between terminations insulation resistance no permanent breakdown or flash-over ? 50 % of values specified in section ?insulation resistance? of this specification sub-group c2 4.12 damp heat steady state 56 days, 40 c, 90 % to 95 % rh no load 4.12.1 initial measurements capacitance tangent of loss angle: 1 khz 4.12.3 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 5 % of the value measured in 4.12.1 tangent of loss angle increase of tan ? ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.12.1 voltage proof 1350 v dc ; 1 min between terminations no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-group c3 4.13.1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz 4.13 impulse voltage 3 successive impulses, full wave, peak voltage: x2: 2.5 kv for c ?? 1 f x2: 2.5 kv/ ? c for c > 1 f max. 24 pulses no self healing breakdowns or flash-over sub-clause number and test conditions performance requirements
f1772-2 310 v-x2 vishay bccomponents interference suppression film capacitors mkt radial potted type www.vishay.com for technical questions, contact: rfi@vishay.com document number: 28161 352 revision: 13-jan-12 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c3 4.14 endurance duration: 1000 h 1.25 x u rac at 110 c once in every hour the voltage is increased to 1000 v (rms) for 0.1 s via resistor of 47 ? 5 % 4.14.7 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 5 % compared to values measured in 4.13.1 tangent of loss angle increase of tan ? ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.13.1 voltage proof 1350 v dc ; 1 min between terminations 2120 v ac ; 1 min between terminations and case no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-group c4 4.15 charge and discharge 10 000 cycles charged to 435 v dc discharge resistance: 4.15.1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz for c > 1 f at 1 khz 4.13.3 final measurements capacitance | ? c/c| ? 10 % compared to values measured in 4.15.1 tangent of loss angle increase of tan ? ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.15.1 insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-group c5 4.16 radio frequency characteristic resonance frequency ? 0.9 times the value as specified in section ?resonant frequency? of this specification. sub-clause number and test conditions performance requirements r 435 v dc 1.5 x c du dt ? ?? ----------------------------------------- =
document number: 28161 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 13-jan-12 353 f1772-2 310 v-x2 interference suppressi on film capacitors mkt radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c6 4.17 passive flammability class c bore of gas jet: ? 0.5 mm fuel: butane test duration for actual volume v in mm3: v ?? 250: 5 s 250 < v ? 500: 10 s 500 < v ? 1750: 20 s v > 1750: 30 s one flame application after removing test flame from capacitor, the capacitor must not continue to burn for more than 30 s. no burning particle must drop from the sample sub-group c7 4.18 active flammabili ty 20 cycles of 2.5 kv discharges on the test capacitor connected to u rac the cheese cloth around the capacitors shall not burn with a flame no electrical measur ements are required sub-clause number and test conditions performance requirements 45.0 ~ 8 mm 12 mm
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.

▲Up To Search▲

Price & Availability of F177233320

	To Download F177233320 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .